The latest version Scania VCI 3 Diagnos Programmer SDP3 2.50.2 has been tested by an obdii365.com engineer. We provide software download and 1 time activation service.
Sdp3 2.50.2 Truck (included)
Industry /Marine 2021 –PAY $69.99
Supported diagnostic interface: SCANIA VCI3
Win7 pro sp1 just 32 bit
Resource 1: Mega Link
Free Download Scania SDP3 2.50.2 for VCI3
Resource 2: stable, 100% working with 1 time free activation
Scania was able to update most of the trucks with a secret update by sdp3 in 2.49 and 2.50 programs, and with the applied change.
SDP3 Function List:
The adapter with that new software does not work with trucks and engines manufactured before 2004.6. The main feature of VCI-3 – Work through a high-speed WI-FI connection. Also in the device has a USB port.
The program supports the following vehicles:
L, P, G, R and S series (2016-)
P, G, R and T series (2003-)
F, K and N series
The program supports the following engines:
SDP3 2.50 New Features
- Check wizard for fuel level measurement for the sensor from bodybuilder now also applies to trucks.
- Correction of Checking the EGR circuit to verify rectified faults
- Scania XCOM is a diagnostic program for reading, saving and changing ECU data, such as error codes, statistical data parameters, etc., using the Scania VCI3 interface, which is used to connect to the ECU via the CAN protocol.
- Scania SOPS are files that are used to store information about the parameters of all units and modules of a truck or bus.
- The working principle of Scania SOPS file Encryptor/Decryptor Editor
- The Scania SOPS software works as a SOPS file encoder-decryptor
- Working with Scania SOPS editor is extremely easy even for a beginner:
- 1. Download the SOPS file of any Scania model to your computer using SDP3.
2. SOPS to convert the file to XML format.
3. Edit an XML file using any XML editor (for example, Excel).
4. Change more than 300 parameters, such as AdBlue, EGR, NOx Control, etc.
5. Convert the XML file to SOPS.
6. Upload the SOPS file to the car using SDP3.
How to Install Scania SDP3 2.50.2 on Windows 10?
Step 1: Install Adobe Reader9.2
Open Scania vci3 v2.50.2 folder
Step 2: Install setup
Extract Scania Diagnos& Programmer 3 2.50.2 to the same folder and you will get SDP3_184.108.40.206_all_lang file
Run SDP3_220.127.116.11 setup
Agreement license agreement
Make sure the VCI unit and the SDP3 USB key are disconnected from the computer before continuing with this installation
Download and install Net Framework 3.5
Go to Scania vci3 2.50.2/FIX folder, run _prereqset64v3 file
Step 3: Install driver
Go to C/Scania vci3 2.50.2/FIX folder, install the corresponding system driver
Here we install it on Win10 64bit, so we install x64 driver
Select install this driver anyway
Driver installation is completed
Step 4: Activate SDP3
Run Hardware ID Reader program
Step 5: Crack SDP3
Copy all files in Scania vci3 2.50.2/FIX/FILES TO REPLACE folder and replace them in C/Program Files (x86)/Scania/SDP3 folder
Step 6: Run software