Program Toyota Fortuner 2019 8A All Key Lost with OBDSTAR X300 Pro4

Here is a tutorial on Toyota Fortuner 2019 8A (H) chip All key lost programming with OBDSTAR X300 Pro4 and Toyota AKL cable. No seed code is required.

 

Device required:

OBDSTAR X300 DP PlusX300 Pro4, Key master DP or Key Matser 5
OBDSTAR P002 adapter and Toyota 8A AKL cable
Generate emulator Key SIM

Blade key, key shell and chip
Network connection is required during the programming procedure.

 

Procedure:

Obdstar Toyota Fortuner 2019 8a Akl 1

Obdstar Toyota Fortuner 2019 8a Akl 2

Connect P002 adapter, Ford AKL cable with X300 Pro4 and vehicle (OBDSTAR will show connection wiring diagram, or check previous post for more information)
Select Immobilizer- Toyota Lexus Scion V32.55 – Select System – Blade – Type 3- Europe – Read Immo data

Obdstar Toyota Fortuner 2019 8a Akl 3

Obdstar Toyota Fortuner 2019 8a Akl 4
Confirm cable connection is okay
Updating firmware

Obdstar Toyota Fortuner 2019 8a Akl 5
Reading data
Save immo data
Select Make Start Key function – Kery SIM simulator

Obdstar Toyota Fortuner 2019 8a Akl 7
Connect Key SIM with x300 pro4 via USB cable
Choose correct immo data you just saved

Obdstar Toyota Fortuner 2019 8a Akl 6
Select make start key via Key SIM simulator

Obdstar Toyota Fortuner 2019 8a Akl 8
Generate emulator, wait patiently
Generate success, can start car now.

Obdstar Toyota Fortuner 2019 8a Akl 10
Place the indicator light of the start key close to the ignition switch and insert the blade key without chip into the ignition switch,
turn the blade key to start the vehicle
if the vehicle can be started normally, use the start key and the blade key without chip instead of the original vehicle master key for key duplication.

Done.

 

OBDII365