OBDSTAR X300 DP Plus Jeep Cherokee 2019-2020 Proximity Key Programming

Today, I’d like to share the path of using obdstar x300 DP Plus to program the Jeep Cherokee 2019-2020 Proximity smart key, operation tips and some possible problems & solutions.

 

First come with obdstar DP Plus operation path:

IMMO -> Chrysler / Dodge/Jeep V33/21 -> Manual select model ->Jeep -> Cherokee -> Proximity ->2019-2020.

Obdstar Dp Plus Jeep Cherokee 2019 2020 Proximity Key Programming 01

Obdstar Dp Plus Jeep Cherokee 2019 2020 Proximity Key Programming 02

Obdstar Dp Plus Jeep Cherokee 2019 2020 Proximity Key Programming 03

Obdstar Dp Plus Jeep Cherokee 2019 2020 Proximity Key Programming 04

Obdstar Dp Plus Jeep Cherokee 2019 2020 Proximity Key Programming 05

Obdstar Dp Plus Jeep Cherokee 2019 2020 Proximity Key Programming 06

 

Here, it will remind you “Please connect the [OBDII-16] and [FCA 12+8] adapter at the same time to complete the operation!”.

Obdstar Dp Plus Jeep Cherokee 2019 2020 Proximity Key Programming 07

Obdstar Dp Plus Jeep Cherokee 2019 2020 Proximity Key Programming 08

 

Then, it will remind you “This function is available by connecting the server, please ensure the Internet connection is normal. ”

Obdstar Dp Plus Jeep Cherokee 2019 2020 Proximity Key Programming 09

 

Next is to read pincode first, then program key. In the process of programming the key, you can click “Tips” to refer to any problems encountered.

Obdstar Dp Plus Jeep Cherokee 2019 2020 Proximity Key Programming 10

Obdstar Dp Plus Jeep Cherokee 2019 2020 Proximity Key Programming 11

Okay, I stop here, the next operation is rather simple, just follow the instructions on the screen to operate it.

 

Next are the collection of some possible problems & solutions:

Fiat 500x 2020
Obdtsar X300 DP+
FCA 12+8 adapter

Read Old Mileage = OK
Write new Mileage = FAILED

Told ok but after i can see on dash only —— and on diag I see 1000000km
Tried to Write value to 0 But after this RED H0 error show on cluster

Solution:
After H0 error dash is at 0km.
Connect Multiecuscan:
Perform dash replacement. After This cluster show 0 and H0 error is solved
Increase odometer with MES to desired value

 

Jeep Renegade 2019
Obdtsar X300 DP+
FCA 12+8 adapter

Read Old Mileage = OK
Write new Mileage = FAILED

Told ok but after i can see on dash only —— and on diag I see 1000000km

Solution:
Write 0km and after Go Up with another diag tool (I used multiecuscan)

 

3.

Jeep Compass 2018
Obdtsar X300 DP+

Read Old Mileage = OK
Write new Mileage = OK

 

 

Related post:

Lonsdor K518ISE Jeep 2018-2020 Smart Key Programming Manual

sales