How to Get System Log Data from Lonsdor K518ISE?

If you find missing vehicle model or year in Lonsdor K518ISE, for example, I was told that the k518 will do 2015 Ford Fusion AKL, but I can only find Fusion till year 2009.  In this case, you can get the system log data and send it to Lonsdor engineer for analysis.

Press One Key Update-> Check for updates, enable network connection and follow steps below to get log data.
Lonsdor K518 Log Data 1
Hold these two buttons marked in red above at the same time, you will enter the interface below.
Lonsdor K518 Log Data 2
Click “System Information” once and you will enter the interface as shown below. Click the area marked in red for 5 to 8 times in one second continuously and quickly. And then
click the area marked in green once.
Lonsdor K518 Log Data 3
You will enter the interface below once again.
Lonsdor K518 Log Data 4
Hold the return key of the K518 for several seconds, you will enter the interface as shown in Picture 6. Click “Get System Log”
once and then click “SD Card Scan” once.
Lonsdor K518 Log Data 5
Lonsdor K518 Log Data 6
After that, connect the K518ISE to a computer and you will find a file called “System Log”.
Lonsdor K518 Log Data 7
Then send the system log data to your dealer.