Has anyone bought a clone Fgtech 0475 version 2019 instead of 2018?

This is for those who are looking for a new Fgtech 4 firmware 0475, released in the year 2019.

The reasons why you should have 2019 Fgtech 4 fw 0475 instead of the old fw 0386:

 

1: Components improvement

2: Better operating systems compatibility

3: New vehicles & ECUs coverage

4: Security – Tested successfully

 

 

Part 1: Components improvement

FGTECH 4 FW 0475 EU version has been improved a lot in the PCB.

fgtech-4-fw-0475-pcb-1

fgtech-4-fw-0475-pcb-2

source: http://www.obdii365.com/wholesale/fgtech-galletto-v54-0475-eu-version.html

 

  1. Old components fixed: more stable:

FGTECH 4 FW 0475 EU version fixed all unstable problems and errors which FW 0386 had.

The engineers have corrected MCU, EEPROM , Relay, Resistance, Led, Solder, Pin, Capacitor

2. New components added: Tricore supported

FGTECH 4 FW 0475 EU version adds new components, best usb bridge and relays.

Work well with OBD / BDM / Boot / Tricore,

But FW 0386 is not good at Tricore.

  1. Original components used:

The board comes with original FR232 USB bridge and relays.

 

Part 2: Better operating systems compatibility

 

The old FGTECH 4 0386 can only work well with Windows XP.
But the new FW 0475 EU version supports more OS :

Windows Vista

Windows XP

Windows 7 32bit and 64bit

 

Look here: Galletto V54 Windows 7: Confirmed! Use with relief and security!

 

Network: available. you can use it with network connected!

Anti-virus software: closed! please close all anti-virus sw on your PC before install!

 

Steps to install Gellatto V54 for Fgtech 4 clone fw 0475:

step 1: run v55 for 0475 all win.EXE

step 2: copy Evo.dll and mfc42.dll to C:/Program Files/fgtech v54 – win 7

Attach: galletto v54 download link

https://mega.nz/#!51FjSTKA!TwIeJRQGHW6ABU3htne-HUVg_UnMtPG2uTxD1REZkIA

Password : cooked2017

You have to know: the galletto v54 link above only tested successfully with the new fgtech 4 firmware 0475. you’re not advised to try it with the old fgtech – HIGH RISK!!!!!!!! you have to try it at your own risk and no one hold any responsibility!

fgtech-4-fw-0475-software

This is for your information.

FGTECH 4 FW 0475 EU version is unlocked and you can use it online
FW 0378 must disconnect the Internet when using FGTECH 4 0475.

Part 3: New vehicles & ECUs coverage

 

Fgtech 4 firmware 0475 has a much better compatibility of vehicles, ECUs and protocols!

Highlight: You will have good lick with Tricore on Fgtech 0475!

New vehicles and ECUs list:

11/12
OBD driver SSang-yong Del-phy DCM3.7 Read/Write, Checksum

11/12
OBD driver for Fer-rari 458 Italia MED9.6 Ecu Master and ECU Slave Read/Write, Checksum

10/12
OBD driver for Fi-at/Al-fa/Lan-cia Twi-nair/Mult-iair 8GMF and 8GSF Read/Write, Checksum

10/12
OBD driver for Ma-zda 5, Ma-zda 6 2.0 Diesel ECU RF8x Read/Write, Checksum

10/12
OBD driver for Ma-zda 5, Ma-zda 6 2.0 Diesel ECU RF7x Read/Write, Checksum

09/12
OBD driver for Sim-os 10.xx VA-G 1.2 TSI Read/Write, Checksum

09/12
OBD driver for CRD 3.xx Merc-edes 2200 CDI Read/Write, Checksum

09/12
Simos PCR2.1 VA-G 1.6 TDI Unlock Boot Tool – Read/Write EEPROM

09/12
OBD driver Sim-os PCR2.1 VA-G 1.6 TDI Read/Write, Checksum

08/12
RSA recognition Peu-geot Bip-per

08/12
RSA recognition Citr-oen Ne-mo

08/12
OBD driver Driver for writing Bo-sch EDC16C34/5 Peu-geot Bip-per Read/Write, Checksum

08/12
OBD drive Driver for writing Bo-sch EDC16C34/5 Citr-oen Ne-mo  Read/Write, Checksum

07/12
OBD driver Del-phi DCM3.5 for Ta-ta Sa-fari  Read/Write, Checksum

07/12
Checksum recognition for DCM3.7 Ssan-gyong

07/12
Checksum recognition for DCM3.7 Op-el and Sa-ab

07/12
Checksum recognition for DCM3.7 Ki-a  and Hyu-ndai

07/12
Boot Visteon ST10F275 RX-TX Mode

07/12
Boot ME7.9.10 ST10F275 RX-TX Mode

06/12
Checksum recognition for Denso Sub-aru Tri-beca

06/12
Boot Mitsu-bishi MH7203 Hyu-ndai

06/12
Checksum recognition for Denso Nis-san L200

06/12
Checksum recognition for Denso Nis-san X-Trail

06/12
OBD driver Op-el Simtec75 CAN  Read/Write, Checksum

05/12
OBD driver  Pors-che SDI3 CAN  Read/Write, Checksum

05/12
Cor-vette Utility CAN for change VIN, Code Align, Erase Errors

05/12
Corette Utility VPN for change VIN, Code Align, Erase Errors

05/12
OBD driver Reault SID305 CAN  Read/Write, Checksum

05/12
OBD driver Masrati ME9 CAN  Read/Write, Checksum

04/12
Tool Boot Hitaci Phase 3

04/12
Tool Boot Hitaci Phase 2

04/12
OBD driver Fi-at ME17.31 CAN  Read/Write, Checksum

04/12
Boot Mits-ubishi for L200 MH8102F

03/12
Boot Mitsu-bishi for Lan-cer EVO MH7202

03/12
Fi-at MJ8DF CAN Serial Injectors

03/12
Fi-at MJ8DF CAN Serial Injectors

02/12
OBD driver Fi-at MJ8DF CAN Read/Write, Checksum

02/12
OBD driver Fi-at MJ8DF K-line Read/Write, Checksum

02/12
OBD driver Merc-edes Del-phi CRD2.xx CAN Read/Write, Checksum

01/12
OBD driver Fo-rd Del-phi DCM3.5 CAN Read/Write, Checksum

01/12
OBD driver PS-A Delp-hi DCM3.5 CAN  Read/Write, Checksum

01/12
OBD driver VA-G Sim-os 3xx Boot mode 29F400 C167 Read/Write, Checksum

12/11
OBD driver VA-G Sim-os 9.1 Boot mode 29F400 C167 Read/Write, Checksum

12/11
OBD driver VA-G Sim-os 7.1 Boot mode 29F400 C167 Read/Write, Checksum

12/11
OBD driver VA-G Sim-os 33 K-line serial Read/Write, Checksum

12/11
OBD driver VA-G Sim-os 32 K-line serial Read/Write, Checksum

12/11
OBD driver VA-G Sim-os 3PG K-line serial Read/Write, Checksum

12/11
OBD driver VA-G Sim-os 3PE K-line serial Read/Write, Checksum

12/11
OBD driver VA-G Sim-os 3PD K-line serial Read/Write, Checksum

12/11
OBD driver VA-G Sim-os 3PC K-line serial Read/Write, Checksum

12/11
OBD driver VA-G Sim-os 3PA K-line serial Read/Write, Checksum

12/11
OBD driver VA-G Sim-os 9.1 K-line Read/Write, Checksum

11/11
JTAG MPC55xx

10/11
New password Triore Tprot V08-10

10/11
OBD driver Ren-ault Val-eo V40, Read/Write, Checksum

10/11
AUD Renesas

10/11
Boot Renesas

 

NEW JTAG – BDM – MOT – FREESCALE:

 1.Freescale MPC 5553/5554/5565/5566 NEXSUS PORT New IAW MJD 8F2 – Mair 8GMF

2.New Delphy DCM3.5xx DCM3.7xx TRW

3.MOT Free scale MPC 555/556/561/562/563/564/565

4.MOT MC 68332 – MC YQQCU – MC 68377 Trionic 5/7/8 For GM- For OPEL- For SAAB

5.MOT MC 68376 Campi 01 for Lamborghini – Lotus

6.MOT MC 68336 MEMS D5

7.MOT ZC 439615 – ZC 439507 IAW For FIAT – VAG

8.New Line OBD protocols VPM for GM Hummer-Corvette-Munstang-Blazer-Cadilac

9.New Line OBD protocols Tx-Rx – for Subaru – For Mitsubischi – For Hitachi – For Denso ecu

10.All EDC17 MED17 is good always modify with Boot Mode

 

 

Part 4: Security – Tested!

 

Fgtech v54 fw 0475 is tested by not only engineers but a lot of real customers.

 

stable and easy to use,100% workable“, said one of customers off OBDII365.com:

 

1.) EDC16U34 (03G 906 021 PD) via obd2 r/w caddy 2010 1.9tdi

2.) Z10XE Opel Corsa 1.0 (ME1.5.5) on the bench r/w

3.) Z18XE Opel Zafira Simtec 90 71.1 r/w (24kb file!!!) on the bench

4.) Fiat Stilo 1.6 16v 2001y ecu 5NF.T1 via OBD2, on the bench via K line r/w

5.) Land Rover 2.0 td4 diesel DDE4 Bosch r/w via OBD2

6.) EDC16U1 r/w via OBD2 Touran 1.9TDi, Seat Altea 1.9 tdi

7.) Delphy DCM3.4 Pezo 308 2.0 HDi 2007 via OBD2 (W not tested, just R)

8.) EDC16C3 via OBD2 ok, full BDM on the bench r/w (grand vitara 1.9DDiS, 2007)

9.) EDC15 PD 1.9 passat via OBD2 r/w

10.) EDC15C2 Peugeot 406 restyl 2.0 HDI 2004 via OBD2 r/w

11.) EDC15C7 r/w via OBD2 Fiat Marea 1.9 JTD 2002god

12.) EDC17CP14 Audi A4 2.0 tdi 2009y (03L 906 019 AL, 03L 906 022 KC) r/w on the bench boot

13.) Sagem S3000 on the bench read Jtag renesans

14.) Astra G via obd read Delco 1.7 isuzu

15)This is a very nice version without all the hassle others typically have. Works fine with 0475 tool in Windows 7 x64.

16)Work very well Sp3 , I have Dell D530 Windovs XP 3 working O.K

 

Test with images can be found at http://blog.obdii365.com/2018/12/27/eu-fgtech-galletto-v54-fw0475-download-install-car-list-faqs/

OBDII365