How to diagnose Citroen C3 with Lexia 3 Diagbox clone

China cloned Lexia 3 Diagbox tested with Citroen C3:

 

Citroen C3 Diagnosis – Global Test

lexia-3-citroen-c3-diagnostics-1

lexia-3-citroen-c3-diagnostics-2

Switch off the ignition and switch it on again

lexia-3-citroen-c3-diagnostics-3

Switch for the vehicle configuration

lexia-3-citroen-c3-diagnostics-4

Lexia3 is testing systems from Citroen C3

lexia-3-citroen-c3-diagnostics-5

lexia-3-citroen-c3-diagnostics-6

lexia-3-citroen-c3-diagnostics-7

Lexia 3 is reading ECU: Delphi C6

lexia-3-citroen-c3-diagnostics-8

Lexia 3 cable is gonna to read fault codes

lexia-3-citroen-c3-diagnostics-9

Intermittent fault

Engine speed signal incorrect signal

lexia-3-citroen-c3-diagnostics-10

lexia-3-citroen-c3-diagnostics-11

lexia-3-citroen-c3-diagnostics-12

lexia-3-citroen-c3-diagnostics-13

The method used does not propose a solution

 

Permanent fault

Flowmeter signal short circuit to each open circuit

lexia-3-citroen-c3-diagnostics-14

lexia-3-citroen-c3-diagnostics-15

lexia-3-citroen-c3-diagnostics-16

lexia-3-citroen-c3-diagnostics-17

lexia-3-citroen-c3-diagnostics-18

Check for the presence of the fault “turbocompressor”

lexia-3-citroen-c3-diagnostics-19

Switch off ignition

D02802 Wait for 15 seconds before proceeding with the diagnosis

Switch on ignition

lexia-3-citroen-c3-diagnostics-20

The fault “turbocompressor” is absent

Carry out the other checks on the diagnostic tree

lexia-3-citroen-c3-diagnostics-21

Done!

 

www.obdii365.com

OBDII365