FVDI 2018 Commander works more stable than old versions and loads no problem on Windows XP, Windows 7, Windows 8 and Windows 10. Here’s demo guide on programming smart card on a Renault Laguna 3 under Windows 10 operating system.
Procedure:
Open 2018 FVDI Quick Loader
Select Renault->V5.4
Select Key Learning
Select vehicle Laguna III x91 2007-
Press Open
Select Read Pin Code
Please remove the key/card before the learning procedure is started.
IMPORTANT:
If car is Megane III/Scenic III/Fluence:
-If you will learn virgin key/card-PUT this card in ignition lock (without turning ignition)
-If the card is working or already precoded-remote the card from the ignition lock at all
Press OK.
V2018 FVDI Read Pin code success.
Select number of keys to be learned: 2
Press OK.
Insert key 1 and turn on ignition
Insert key 2 and turn on ignition
Press OK to store the learning result.
Turn ignition off then turn it on
Laguna3 key learning success
Done.
Note: You can also calibrate LagunaIII mileage with FVDI 2018 abrites commander.