Reset VOLVO S40 2008 Airbag SRS via Xtuner E3 Scanner

This is the first customer review of the new Xtuner E3 OBD2 EOBD full diagnostic tool. Big thanks to Alfonso for his kindness.

Price to get xtuner e3 scanner:


($40 cheaper he got from )

Reason to buy this scanner:

1- he wanna reset the SRS light for his VOLVO S40 2008

2- he’s from Spain. And Spanish is available in this software while lots of diagnostics cannot support Spanish.

Note: Xtuner E3 is a good choice for the international users. It covers Italian, Chinese, English, Japanese, German, Russian, French, Spanish, Portuguese, Polish,Turkish, Dutch, Hungarian, Korean, Czech, Arabic, Indonesian, Persian, Thai, Vietnamese, Finnish, Swedish, Romanian, Bosnian, etc.

Airbag SRS revision urgente on S40 dash


What he did for SRS light with the the Xtuner E3 scan tool:

Alfonso run the diagnostic software on a Dell laptop.

Connected the mini adapter on the driver side under the dash

Selected the model:  VOLVO-> S40 (04-)-> 2008

then went to control unit menu

and selected Retención adicional del sistema de modelo (SRS)


Then the DTCs displayed:

SRS-005 Surninistro de energla de la baterla tension demasiado baja

SRS-E001 Comunicacion modulo de control. Comunicacion defectuosa

SRS-0013 Bolsa de aire de conductor, etapa 1 Resistencia demasiado alta

SRS-0019 Bolsa de aire de conductor, etapa 2 Resistencia demasiado alta

(error message in English:

SRS-005 Battery power reserve too low

SRS-E001 Communication control module. Defective communication

SRS-0013 Driver airbag, stage 1 Resistance too high

SRS-0019 Driver air bag, stage 2 Resistance too high)


He cleared the four faults

then No hay coding error presente! (No error code is present!)


turned off the ignition and turned on again to check

The Airbag SRS issue was fixed.