NCS Expert & WinKFP read write reset update FRM

This is a customer solution on how to use BMW coding software NCS Expert & WinKFP to read/backup bmw cas and frm, how to write win and vo to frm, how to reset frm default and how to update frm. Try at your on risk!

 

Tools to use:

Xprog-m v5.55

BMW ICOM A2

PC to run Xprog v5.5.5 software, NCS Expert and WinKFP

 

 

 

FRM fix list:

NCS expert read/backup cas and frm

NCS expert write VIN and VO to FRM

NCS expert reset frm default according to VO

WINKFP update frm

WINKFP trying to locate the zb or zusb

 

 

 

NCS expert read/backup cas and frm

goto work folder delete nettodat.trc and fsw_psw.trc

file

load profile

expert

f1 fg/zcs/fa

f3 zcs/fa f. ecu

r56

cas

f6 back

f4 process ecu

cas

f2 change job

codierdaten_lesen (reads coding from ecu)

f4 reading ecu

goto work folder move nettodat.trc and fsw_psw.trc to a new folder CAS Original make files read only

f1 change ecu

frm

f4 reading ecu

goto work folder move nettodat.trc and fsw_psw.trc to a new folder FRM Original make files read only

 

 

 

 

NCS expert write VIN and VO to FRM

file

load profile

expert

f1 fg/zcs/fa

f3 zcs/fa f. ecu

r56

cas

f6 back

f4 process ecu

frm

f2 change job

fa_write (writes FA aka VO to ecu)

f3 execute job

f2 change job

fgnr_schreiben (writes FG aka VIN to ecu)

f3 execute job

 

 

 

 

NCS expert reset frm default according to VO

goto work folder delete nettodat.trc and fsw_psw.trc

file

load profile

expert

file

edit profile

click FSW/PSW

uncheck FSW-/PSW-Manipulate with FSW_PSW.MAN

OK

OK

f1 fg/zcs/fa

f3 zcs/fa f. ecu

r56

cas

f6 back

f4 process ecu

frm

f2 change job

sg_codierren (writes coding to ecu)

f3 execute job

 

 

 

 

WINKFP update frm

f1 Comfort mode

f3 update ZUSB pick FRMR3

f4 enter vin

f8 done

f3 prog. zb-update

I don’t remember the rest from here but it updates the FRM. It takes 5-10 minutes and there is a progress bar.

 

 

 

If WINKFP update frm doesn’t work.

Updating WINKFP using BMW Coding Tool

extract the datens for your chasis into a folder

open BMW coding tool

select sp-source

choose the folder with the extracted datens

update WinKFP

 

 

 

 

WINKFP trying to locate the zb or zusb

(I don’t know)

f1 Comfort mode

f3 update ZUSB pick FRMR3

f4 enter vin

f8 done

f5 diagnosis

f1 ecu status

f2 ecu ident

 

Related document:

http://blog.obdii365.com/2016/10/12/xprog-winkfp-fix-dead-frm3-on-bmw-r56/

OBDII365