Here’s a user solution to change odometer from miles to km on BMW E-series by using NCS Expert step-by-step. Instruction: Part 1 – NCS Expert read miles 1. Connect your cable (BMW INPA K+DCAN cable or BMW ICOM A2 emulator)… Continue Reading
Here is the step-by-step guide to change BMW VO (Vehicle Order) by using BMW Ncs expert coding software. Instruction: Before NCS Expert can be used a Profile must be loaded. Select File/Load Profile from top menu bar Select Expert Mode, then… Continue Reading
I have managed to replace BMW EKPM2 with a new EKPM3 and do EKPM3 coding successfully. Here is what i used and what i did with BMW NCS expert coding software. You need: You need to buy/download INPA and Ediabas, NCS… Continue Reading
Share are two common methods to complete Halogen to LED DRL conversion, one with NCS expert and the other by hardwire. Follow at your own risk! Method 1 – Use NCS expert to get the halogen light angel eyes… Continue Reading
It’s a dummy guide to help many out and try to make sense of NCS expert with BMW ICOM A2. All said by a ICOM A2 user at bmw forum… He said: Before all operation, you need a good ICOM… Continue Reading
Good news! BMW E series CIC retrofit coding success!! Share the instruction here on BMW E89 CIC retrofit with BMW INPA K+DCAN cable & NCS EXPERT software. NOTE: Try at your own risk! You need: BMW INPA K+DCAN cable… Continue Reading
This post starts with BMW 330D steering angle sensor problem that after it replaced the 2 orange lights just keep coming back on. Then I was told to use Inpa read out fault code and NCS expert to code the… Continue Reading
