Some info collections of how can be solved Mercedes Benz 48V Battery Failure (W205, W213) through DTS MONACO software.
Diagnostics of a 48 volt Mercedes W213 starter battery and a method for solving it using DTS Monaco 8.16 after a long parking or accident.
- Recommended advanced diagnostic equipment is: SD connect C4
- Xentry for initial diagnosis;
- DTS Monaco or Vediamo engineer software with a full database to support offline coding
Repair Mercedes W205 W213 48v battery by Xentry & DTS Monaco
Step 1: Perform parking and try to Position the vehicle in a flat position for easy repair
Step 2: Make a connection with the tester
Step 3: Check the error code in G1/3 on board the electric battery system battery
Error fault B183304 and B183371
Step 4: Run DTS Monaco, Connect the CBF (LIB) file for programming (see images below)
Step 5: Reset hardware and clear the error to see the results, start the car to stop Check the operation of the car again
If cannot find proper CBF files for DTS, go for CG100 programmer and follow instructions here