How to Flash Autel MS906 when Screen Freeze?

Tutorial and download: Autel MaxiSys MS906 screen freeze (splash Boot logo) No response Symptom and solution.



When the power button is pressed, it is normal for the MaxiSys logo to appear on the initial screen for about 20 seconds and then to the main menu screen,

The boot logo (MaxiSys) stays still as if it has stopped, but it does not go to the main screen although it blinks.

At this time, it does not turn off even if you press and hold the power button, and it repeats to turn on again after a while.

Flash Autel Ms906



Download Autel MS906 flash file


How to flash Autel MS906?

  1. Download the compressed file and unzip it, find out the “Autel_906” folder;
  2. Copy the whole “Autel_906” folder to the blank TF card root menu. (The TF card should be formatted to FAT32);
  3. Plug the TF card into the MS906 card slot;
  4. Power on the MS906 and it will go to the flash process automatically.


If flash succeeded, it will require buying and downloading updated software for normal use, subscribe Autel MS906 one year update service


Flash won’t be 100% successful because the flash software package is a higher version than the device. MaxiCOM MK906/MK906BT and MS906 Pro are recommended.


Read also: How to replace Autel MaxiSys TP Screen?