Mercedes HU5 Ethernet DOIP Programming by DTS Monaco

How-to: export Mercedes Benz HU5 control module data from Xentry and import to DTS Monaco to perform Ethernet DOIP programming successfully.

 

 

Connect VXDIAG Benz c6:

Vxdiag Benz C6 Dts Monaco Doip Programming 01

Open DTS Monaco – VXDIAG, click on “Diagnostic Services” and it has no HU5 Ethernet option and can’t program DOIP, click on “File” and then “Close” to exist DTS to import the data.

Vxdiag Benz C6 Dts Monaco Doip Programming 02

 

Click on “Administrate and manage DTS projects”.

Vxdiag Benz C6 Dts Monaco Doip Programming 03

 

Enter “System Configurator” – > “System settings” -> “Interfaces”, check if the options are correct as below.

Vxdiag Benz C6 Dts Monaco Doip Programming 04

 

Right click on “Xentry Diagnosis” – “Open file location” -> “Xentry” -> “Kontexte” -> “ODXProjekte” – >PKW_COMMON” -> “DBR”. This is the location of HU5 control module data.

Vxdiag Benz C6 Dts Monaco Doip Programming 05

 

Choose the HU5 control module data to copy, then paste them into “205 DTS DOIP” folder.

Vxdiag Benz C6 Dts Monaco Doip Programming 06

Vxdiag Benz C6 Dts Monaco Doip Programming 07

Open “Temporary workspace”, choose HU5 control module data.

Vxdiag Benz C6 Dts Monaco Doip Programming 08

Vxdiag Benz C6 Dts Monaco Doip Programming 09

Enable DOIP switch.

Vxdiag Benz C6 Dts Monaco Doip Programming 10

 

Choose “HU5 Ethernet” to check the software NO and to choose the programming files.

Vxdiag Benz C6 Dts Monaco Doip Programming 11

 

Click on “Flashing programming”, then “HU5 (UDS_Ethernet)”, then “205 DTS DOIP”, then choose the 3 files to open.

Vxdiag Benz C6 Dts Monaco Doip Programming 12

Vxdiag Benz C6 Dts Monaco Doip Programming 13

Click on “Diagnostic Services”, then “Read ID” to confirm the software NO again.

Vxdiag Benz C6 Dts Monaco Doip Programming 14

Vxdiag Benz C6 Dts Monaco Doip Programming 15

Click on “Flash Programming” , then “Run” one by one.

Vxdiag Benz C6 Dts Monaco Doip Programming 16

Vxdiag Benz C6 Dts Monaco Doip Programming 17

Job is done.

 

www.obdii365.com

sales