How to Install KTMflash ECU Flasher Software and Read Infineon TC1797

KTMFLASH ECU programmer supports VAG DQ200 DQ 250 DQ500 VL381 DL501 Transmission reading, read eeprom via OBD, read Infineon via boot mode, supports ME17 TC1728/1767 data reading & writing. Here’s the step-by-step guide to install ktmflash software and demo example on reading Infineon TC1797 gearbox transmission data.

Part 1: Install KTM Flash software 

Operating system: Windows XP

Language: English/Russian

NOTE:

Do use default software in software CD only.

Better use laptop with Intel processor.  Device can by used only once if use laptop with AMD processor.

Please uninstall ecuflash software on your computer. ECUflash is incompatible with KTMFlash software.  Otherwise device will be locked.

Disconnect network connection before installing/using software.

 

Step 1: Install software driver 

Open My Computer->KTMFlash software CD->KTMflash software drivers folder

install-ktmflash-software-1
Open GrdDrivers

install-ktmflash-software-2
Install guarant drivers

install-ktmflash-software-3
Open openport2-setup
Install Openport 2.0 J2534 Drivers Setup

install-ktmflash-software-4
Accept license agreement

install-ktmflash-software-5
Choose install location: C://Program Files/OpenECU/OpenPort 2.0
Click on Next
Finish.

install-ktmflash-software-6
Copy and paste pcmflash from KTMflash software folder to desktop

The action will automatically generate a PDF document
Open NT_BOSCH_EDC17C54_IROM_TC1797_VAG_1033 pdf with Adobe Reader 9
Accept license agreement
KTMflash will show you wiring connections for ecu reading & writing

install-ktmflash-software-7

install-ktmflash-software-8

install-ktmflash-software-9

install-ktmflash-software-10

Step 2: Install hardware driver

Connect KTMflash ecu flasher interface with computer

install-ktmflash-software-11
Open My Computer-Device Manger-Guardant dongles to check device is well connected

install-ktmflash-software-12
Install device driver
Select install the software automatically, click on Next

install-ktmflash-software-13
Finish installing the software for Openport 2.0 J2534 vehicle interface

install-ktmflash-software-14

 

Part 2: KTMFlash read Infineon TC1797

Open pcmflash on desktop

Select Interface: J2534-OpenPort

install-ktmflash-software-15
Click on settings

Now you can check KTMFlash interface information and change language

install-ktmflash-software-16

Select read password from VAG TPROT8+

Press on Read button

KTM Flash will display wiring diagram to connect

install-ktmflash-software-17

install-ktmflash-software-18

install-ktmflash-software-19

Read password success, save data

install-ktmflash-software-21

install-ktmflash-software-20

Select read Infineon Tricore BSL from TC1797 EEPROM

install-ktmflash-software-22

Click on Identification

Again KTM Flash will show you wiring diagram to connect

install-ktmflash-software-23

install-ktmflash-software-24

Turn ECU power off completely, then power it on at least 2 sec later

install-ktmflash-software-25

install-ktmflash-software-29

Press on Read button

install-ktmflash-software-26

Untick automatic power control (L-line switch) option

Browse password from data saved above

install-ktmflash-software-27

install-ktmflash-software-28

Press OK.

Turn ECU power off completely, then power it on at least 2 sec later

install-ktmflash-software-30

KTM Flash read Infineon TC1797 transmission eeprom success.

 

www.obdii365.com

sales