Cummins Inline 6 data link:
The INLINE 6 is a highly reliable data link adapter that can be used on a wide range of applications to communicate with vehicle systems via SAE J1708/J1587 and SAE J1939 protocols. Please note that the INLINE 6 is designed to be used with RP1210 compliant software.
Cummins Inline 6 for sale:
Cummins Inline 6 price:
219 usd (27% off)
Cummins Inline 6 software download:
Cummins Inline 6 driver:
How to Install the INLINE 6 software driver:
- Insert the INLINE 6 driver CD into your computer’s CD-ROM drive.
- Run INLINE6_Driver_Setup.exe
- If a Windows Explorer folder opens, select INLINE6_Driver_Setup.exe
Note that on some systems the autorun settings may be set to have the installation
to just begin executing upon CD insertion.
IF YOU SEE:
o WINDOWS XP – A message appear stating “The software you are installing has
not passed Windows Logo…” Click on”Continue Anyway”. Click on”Finish” when
installation is complete.
Cummins Inline 6 reflash:
Download the appropriate INLINE 6 zip file by clicking on a link above (note that unless you have a 64-bit Operating System, you should use the 32-bit file).
Unzip and extract the executable file using zip/unzip software.
Click on the Windows Start menu and click Run.
Click on the Browse button and locate the file you have downloaded.
Click the OK button to install the latest INLINE 6 Driver, reflash utility, and firmware on your PC.
Follow the onscreen instructions to complete the installation.
Connect +8 V to +50 V power to your INLINE 6 adapter through the DB25 cable you have.
Use your DB9F to DB9M serial cable or USB cable to connect the INLINE 6 adapter to the proper PC communication port.
Follow the Driver Installation and other instructions
Cummins Inline 6 engine:
Cummins has introduced a new data link adapter that is fully compliant with TMC’s RP1210 standard, and has been designed and environmentally tested to Cummins standards to be rugged and reliable.
Cummins Inline6 diesel engine:
Cummins has become the innovator and technology leader in data link adapters and service tools for diesel engines.
Cummins Inline 6 running with Insite 7.62 works perfect for diesel engines.
Cummins Inline 6 compatibility:
INLINE 5 and 6 is compatible with both PowerSpec and Insite.
PowerSpec versions of 4.2 and later support the RP1210 protocol and are thus compatible with the INLINE 6 and INLINE 5 adapters. See the chart below for an example of the basic connections needed to hook-up to the vehicle data link.
INSITE versions of 7.5 and later are compatible with the INLINE 6 and INLINE 5. Note that INSITE versions earlier than this are not fully RP1210B compliant and may not work with these adapters. See the chart below for an example of the basic connections needed to hook-up to the vehicle data link.
Cummins Inline 6 pinout:
Cummins Inline 6 is capable of autodetecting between CAN
(SAE J1939, SAE J2534 & ISO 15765/UDS) data rates of 250 kB or 500 kB.
Connections are simple with a standard USB interface that provides power to the unit.
A dual CAN channel allows connection to multiple Electronic Control Modules on the same vehicle for increased productivity and support.
Note that you cannot use inline 5 cable for inline 6 adapter …. because inline 6 cable has 2 additional pins
CAN2 High (+) H – 13
CAN2 Low (-) J – 17
Cummins Inline 6 data link adapter user manual: