Here obdii365.com provides VAS 5054A VAG diagnostic tool software ODIS-S v4.0.0 free download resources.
Free download ODIS 4.0.0 software:
https://mega.nz/#F!2dY3lYSA!ZPUpmEl8kcldN7Q9TUVOog (new ODIS-S 4.0.0 ONLY no launcher)
Note: download links above come from the AP community; not tested yet & with unknown security
For sake of safety, tested old versions should be a better choice:
ODIS 3.0.3 for VW/Audi/Skoda/Seat/Lamborghini and Bentley
ODIS 2.23 for VW Imports / Faw.
ODIS 2.22 for VW Shanghai and Skoda.
All works perfect with vas 5054a (SP33-B，SP33-BO,SP33-E， SP33-C does not pass test) scanners or vxdiag vcx nano 5054 diagnostic tools: both diagnostics OK, key programming and offline flash via vxdiag nano 5054 OK)
If you need vas5054a or ODIS software, please contact
Whatsapp: +86 18259252285
Odis 4.0.0 update news:
This release contains new features and bug fixes.
Support for Windows 10 operating system
Performance optimization in the diagnostic entry
Detection of the VAS 6154 via subnets
Support for non-converging measurements in the GFF
Integration of the brand Bugatti
Deviation in the EcuCom job for “ECU coding” KWP2000
ODIS installation error message – Could not call proc – Actia PDU API
Flashing with large data container, flash session is not started
Fuel system can not be vented // Level not readable
Flash abort ERROR PROGRAMMING at Audi A1 Bremse (TPI 2033217/3)
ODIS crashed when switching from USB to Bluetooth
Bluetooth connection type: No new connection was established after the
diagnostic test was again within range of the VAS5054A.
Crash at application start
Update to 3.0.2 fails with ODS4010E: UpdateProcess failed with 11
Query error memory hangs: “Read control units (33%)”
Connection setup when changing from Bluetooth to USB takes too long
Authentication problem in WLAN infrastructure mode with RADIUS server
VAS 6154 is searched for on the wrong interface after completion of the
ODIS service SingleBuild installation, setup message “Runtime Error” for
DA_14 in the AU48X DSD not possible
VCI 5054 Connection termination for Windows user change
ODIS Interface texts: German texts have been deleted from the XML files
ODIS Service does not display the version of the diagnostic data for MAN in the
Calibration instruction must be adjusted
Buttons are displayed partially in the wrong language (German instead of
The symbol of the status icon changes with the ODIS close
Buttons to start the JRC and choose your own exam is missing
The date in disclaimer with EN-US language is not displayed correctly
In the installation dialog, the language en_US is displayed twice
Speech caseback leads to corrupt feedback file (invalides XML)
Vehicle project VW VIN can not be opened // ODS8003E Execution in system
state PROJECT_OPENED not possible.
VCI-Number on DISS-protocol
For brand AUDI, the Flash mode is supported.
For brand Volkswagen PKW, the Flash mode is only partly supported. The
usage is only allowed if described in TPI.
For all other brands, Flash mode is restricted.
All supported vehicles are listed below.
All Volkswagen Nutzfahrzeuge-Models are supported.
Only immobilizer components in LT2 vehicles can be diagnosed.
Gallardo from MY09-MY14 (only for Immobilizer and Radio Pin)
VAG ODIS 4.0 software tested ok by obdii365.com engineers!!!!!!
Good luck with odis 4.