Here is the instruction on how to fix KTAG master v2.13 KTM100 DIMSPORT firmware 7.003 ecu tuning kit TF card.
Fisrt of all, download KTAG KTM100 TF card fix zip file
http://www.obd2vip.com/download/ktm-tf-fix.zip
Copy KTM TF fix folder to desktop and delete original folder
Open KTM TF fix folder
Cut and paste KTM file to Disk D:/
Follow the connection diagram below to connect K-tag KTM100 TF card and laptop
Format the Removable Disk (F:)
Open Win32DiskImager folder
Open Win32DiskImager file
Browse Image File to D:/KTM.img, follow here Computer/New Volume (D:)/KTM, press Save
Click Write and press Yes to confirm overwrite message
Write image file in progress
Write Successful. Exit the Win32 Disk Imager
Then follow the diagram here to connect KTM100 with laptop and car ECU
Power the KTM100 with power adpater
Connect the Ktag KTM100 master ECU programmer with laptop via USB cable and car ECU via cables in the package
1.GREEN-CAN L
2.ORANGE-VKEY
3.YELLOW-K LINE
4.ORANGE-VKEY
- RED-VECU
6.BLACK-GND
7.BLACK-GND
8.PURPLE-VPP
9.RED-VECU
10.WHITE-CAN H
Open KTM100 Software on desktop
If the system pops up “Error during the server connection (FunctionABL_TRS8)”, just close to ignore it
Select your car ECU engine and type, Press ID button to see vehicle information on the right Info tab.
Select EEPROM and click Read
Start reading EEPROM data
If write EEPROM data goes well, then the TF card was fixed.
Save the EEPROM data