CN900 4C/4D/46/48 auto key programmer has been updated to copy CN1 (4C) and CN2 (4D) chip. Here is the step by step instruction on copy ID63 chip (including connect to PC to decode) using CN900 by CN2.
1. First put the original key with ID63 chip in testing hole and press Identify & Copy. Wait for few seconds will see Decode and P4: XX XX XX XX XX
2. Open computer and find this “CN900 Decode 4D” and open it. The system will prompt: The Database is ready for processing
If the prompt does not appear, click CN900 Decode 4D again.
4. CN900 auto key programmer will display “Decoding” message. And computer screen will display count down Timing as well.
If the device display SUCCESS which means the decode procedure is finished.
5. Decode completed. CN900 will display Copy and P4:01 43 87 93 73. Remove the key from testing hole and put CN2 in the hole.
Press “Copy” button.
6 Check if CN2 copy ID63 successfully
Keep the CN2 in testing hole and press “Back” button and press “Identify& Copy” button. Wait for few seconds then will see the CN2 data showing same as original key with ID63 chip. The chip copy procedure is done completely.