How to update Super version BMW ICOM firmware to V1.38

BMW Super ICOM has upgrade to V2015.06, the new version ICOM ISTA-D ISTA-P has to work with super version BWM ICOM A2+B+C wifi with firmware 1.38.01. Follow the instruction below to update Super ICOM A2 firmware to V1.38.01.

Super ICOM software version:V2015.6
ISTA-D: 3.49.20
ISTA-P: 3.55.4.000
VIN: 2015.06

ICOM hardware/firmware requirement:
Super version BWM ICOM A2 with firmware 1.38.01  1.24.00
BMW Super Icom 2015.06 software
How to update Super ICOM A2 firmware to V1.38.01?

Super version BMW ICOM A2/A1 V1.38 firmware update files free download
(please contact our customer service for download link)

Please connect Super version BMW ICOM A2 (Item NoSP168-BO) with computer using Network cable and feed super ICOM A2 using 12V power adapter or connect ICOM A2 with BMW vehicle.

1) Unzip ICOM A1 A2 Perfect version V1.38 firmware update tool on the desktop
2) Open the unzipped folder and read the instruction on Notepad first
3) Open IE Internet Explorer, Brose to http://169.254.33.45:60080/, login with user name/password: root/NZY1150263
update Super version BMW ICOM firmware to V1.38

4) Click on “Update Firmware”, you will able to see the ICOM firmware information
5) Select “ICOM-BootImage-01-24-00.bin” file, set the image type to “SYSTEM”, click “Send the file”
update Super version BMW ICOM firmware to V1.38
6. When the system pops up “Write the image file to the flash?”, click Yes, then the ICOM red indicator will flash
update Super version BMW ICOM firmware to V1.38
7) Then the system will display “The SYSTEM IMAGE update was successfully”, click “update firmware”,

8) Select “ICOM-ApplicationImage-03-38-01.bin” file, set the Image type to “APPLICATION”, click on “Send the file”
update Super version BMW ICOM firmware to V1.38
9) When the system pops up “Write the image file to the flash?”, click Yes, then the ICOM red indicator will flash again
10) When finishing updating, click “reboot”
update Super version BMW ICOM firmware to V1.38

NOTE:
1. Setting up your computer to obtain an IP address automatically
2. Firstly choose the smaller file “ICOM-BootImage-01-13-00.bin” , then set image type to SYSTEM;
3. Secondly choose the bigger file “ICOM-ApplicationImage-01-18-00.bin”, then set image type to APPLICATION.
4. Originality WIFI BMW ICOM A2 diagnostic system (Item No: SP168) shares the same firmware update instructions, the only difference is the login IP. Ordinary ICOM A2 login IP: http://169.254.92.38:60080/

sales