Key Pro M8 auto key programmer support adding keys and making new keys for multi car brands. Here is the step-by-step instruction on program 2010 Chevrolet Cruze remote keys with key pro m8.
Equipment:
MVP Key Pro M8 key programmer (with 800 tokens inside)
Dongle G (check the dongle list)
http://blog.obdii365.com/2015/03/19/mvp-key-pro-m8-adds-chrysler-dongle-and-jeep-key-programming/
Connect Dongle G with Key Pro M8 key programmer
Select vehicle region: Euro (Europe or USA)
Select program key from: Immobilizer
Select vehicle model on VEHICLE SELECTION menu: Cruze
Turn ignition switch to ON
Key Pro m8 will automatically detect the vehicle VIN information and keys programmed, press Enter key
Select Fault Codes on DIAGNOSTIC MENU and the key pro m8 will detect error codes
Select Clear fault codes
Select Special Functions in DIAGNOSTIC MENU
Check keys programmed: 02 and select Program keys
Manually enter the security code and confirm it
Wait 10 minutes to process
Turn ignition switch OFF and remove key
Open and close driver’s door (The step is very important)
Start to program 2nd key
Turn ignition switch to ON
Wait another 10 minutes
Accept the screen notice
Check engine starts
Key programming procedure is complete
Disconnect the Key pro m8 from vehicle